• Address:

    26 Elizabeth St, South River, NJ 08882

  • Email:

    mail@truck-repair-nj.com

  • Phone line:

    +1 (347) 656-62-73

Two mirrors with similar outlines can require different replacement parts. One head accepts new glass; another is replaced as a unit. A familiar-looking housing may also contain a different adjustment mechanism or electrical connection. Those differences matter before a damaged mirror is ordered.

Contact Truck Repair Shop about mirror impact damage. Our South River, NJ assessment covers the affected fitting and surrounding cab area within our truck body repair service. We then discuss the replacement components and any related work. Tell us which side was struck and whether the mirror still holds its position.

Truck mirror glass replacement depends on the head

AI illustration of generic flat and convex truck mirror heads
AI-generated illustration of generic flat and convex mirror heads; not exact replacement parts.

Broken glass does not establish whether the entire head must be changed. Velvac’s heavy-duty catalog, for example, distinguishes V-back designs with replaceable glass from a version whose glass is not replaceable. The assembly’s construction determines which route is available.

Even a serviceable design needs sound supporting parts. Damage to the housing, glass support or attachment can make a glass-only proposal incomplete. We inspect what remains usable and identify the components included in the estimate. The aim is a securely supported reflective surface, not merely a new piece of glass over damaged hardware.

Flat and convex surfaces are different choices

Rosco’s standard truck range lists flat mirrors separately from convex wide-angle mirrors, with distinct replacement-glass and mounting options. A similar height, width or outline does not make those optical surfaces equivalent.

When only one section is damaged, identify whether it is the main flat surface or a convex section. If the existing mirror has already been changed from the original installation, mention that too. We compare the fitted assembly and its intended arrangement before selecting the replacement. A catalog illustration is useful for identification, but it should not override the details on the truck.

Hand adjustment, motorized movement and heat

AI illustration of a generic mirror housing with a bracket and cable
AI-generated illustration of a generic mirror housing, bracket and cable; not a wiring or fitment guide.

A manually positioned mirror and a remotely adjusted mirror can use different internal supports. Rosco’s AccuStyle parts information, for example, separates a carrier with a hand swivel from a carrier with a motor. A replacement that resembles the old head still needs the correct mechanism.

Heating is another feature to identify independently. Velvac’s 2010 product listings include both manual and remote-adjustment versions with heat. A working adjustment control therefore does not establish that the heating function works, and a heating concern does not by itself identify an adjustment-motor failure.

Describe the functions separately: does the mirror move from the cab control, hold the selected view and clear when the fitted heating system is used? Our truck electrical repair page covers related circuit investigation. We distinguish impact damage from a switch, supply or wiring concern before settling the work needed.

The attachment must suit the cab

The mirror head and its supporting arm are not the same part. Rosco offers two-point, overhang and upright arrangements within its AccuStyle range. Its standard truck parts also distinguish heads, arms and clamp kits. These are specific configurations, not permission to fit any head to any bracket.

After a strike, the attachment area deserves attention alongside the visible glass. A new head cannot correct a damaged support or cab mounting surface. We include the affected fasteners, fittings and surrounding damage in the assessment rather than assuming the visible broken part is the whole job.

The agreed work follows the service instructions for the selected assembly, including its retention method and attachment requirements. Where electrical connections are involved, the fitted functions and connections are considered during reassembly. The completed fitting is checked for secure attachment, adjustment and operation relevant to the work performed.

For a useful first conversation, photograph the front, rear and arm from a safe position while parked. Include any readable mirror label and describe previous replacements; do not dismantle broken glass just to find a number. Call (347) 656-6273 to arrange a mirror damage assessment at 26 Elizabeth St, South River, NJ. We will explain whether the proposed job concerns glass, the head, its support or connected bodywork.


Service terms


  • CLEAR ESTIMATES

    Inspection findings, the proposed work and the estimate are discussed before repairs begin.

  • PARTS OPTIONS

    We agree on suitable parts for the engine, the work and your budget.

  • FREE DIAGNOSTICS WITH REPAIR

    Diagnostic work is free when you proceed with the repair.

  • WARRANTY FOR WORK

    Our repairs carry a warranty. We explain the terms that apply to your job.

Congratulations. Your message has been sent successfully.
Error, please retry. Your message has not been sent.

By submitting this form, you ask us to use the information you provide to respond to your inquiry. See our Privacy Policy. This does not sign you up for marketing.


Your Privacy Choices

Essential site functions and the cookie that remembers your privacy choice stay available.

Cookie Policy · Privacy requests and information

Call: (347) 656-6273