- Address:
26 Elizabeth St, South River, NJ 08882
- Email:
mail@truck-repair-nj.com
- Phone line:
+1 (347) 656-62-73
Illustrative scenario. A diesel 114SD with an EquiFlo dual-tank system develops noticeably unequal fuel levels after work beside one tank. The owner wants to know whether the fuel pump needs replacement. The imbalance is worth investigating, but it does not identify a failed pump.
Truck Repair Shop investigates Freightliner diesel fuel-supply concerns in South River, NJ. This example follows one possible inspection finding and shows how it changes the proposed work. It is an explanation of diagnostic reasoning, rather than a record of a customer repair.
One low tank changes the question

In this example, an inspection confirms that one tank holds substantially less fuel than the other. That is a fuel-distribution observation. It needs to be kept alongside any starting or running complaint, rather than reduced to “the engine is low on fuel.”
Freightliner describes EquiFlo as drawing fuel from, and returning it to, both tanks to maintain balanced levels. Tank breathers allow the pressure inside to remain atmospheric. Their function belongs in an imbalance investigation even when the fuel pump itself has not yet been implicated.
114SD and 114SD Plus: establish the application
Use the complete model designation and the fitted fuel-system information. Across this model family, engine records may identify Detroit DD13; Cummins ISL, L9 or X12; or the full ISL G, L9N and ISX12N designations. Preserve those names accurately. The worked example here is limited to a diesel EquiFlo installation; a model badge alone does not establish that arrangement.
114SD fuel imbalance: follow the vent path
Suppose the inspection finds a pinched breather tube at the tank where earlier work took place. Freightliner’s EquiFlo bulletin identifies pinching, blockage, melting and freezing as possible restrictions. Such a restriction can cause fuel to be drawn from or returned to only one tank.
That gives the hypothetical job a specific direction. The restricted vent path needs correction. Unequal tank levels alone were insufficient to choose a pump; the additional physical finding now explains a plausible interruption in the intended balance.
Our diesel fuel system service relates supply concerns to the installed plumbing and the defect found. Tell us about work near the tanks, even if it was not described as fuel-system service. A moved or trapped tube is relevant information for the assessment.
If the engine loses power or stops, secure the truck safely and arrange assistance. Fuel remaining in the other tank is not a reason to keep operating through an unresolved supply problem.
A visible restriction supports a specific repair

For the pinched-tube example, the repair addresses the affected breather tube and its routing. Freightliner’s documented correction uses a shortened, secured tube following the tank’s shape. Cylindrical and rectangular tanks have different installation requirements.
The replacement must retain the specified vent arrangement and suitable material. Simply choosing a blue tube or cutting a line to an arbitrary length is not a parts or installation specification. We explain the identified line work and associated supports in the estimate.
If the low tank had already allowed the engine to run out of fuel, that event remains part of the job history. Restoring ventilation and restoring the engine’s fuel supply after starvation are separate matters to account for under the fitted system’s procedure.
A clear tube leads elsewhere
If inspection finds no breather restriction, the example’s repair conclusion does not apply. Investigation continues through the actual supply and return arrangement. A bulletin describing one failure path is not evidence that the same defect exists on every truck with two tanks.
Keep the original observation in the handover: which tank was lower, when the difference became apparent and what changed beforehand. Those details remain useful even when the first suspected cause is ruled out.
Discuss a 114SD fuel concern with Truck Repair Shop on (347) 656-6273. The workshop address is 26 Elizabeth St, South River, NJ 08882. Use our contact and directions page to arrange the visit, and bring earlier tank or fuel-line work records so we can discuss a repair tied to your truck’s findings.
Service terms
CLEAR ESTIMATES
Inspection findings, the proposed work and the estimate are discussed before repairs begin.
PARTS OPTIONS
We agree on suitable parts for the engine, the work and your budget.
FREE DIAGNOSTICS WITH REPAIR
Diagnostic work is free when you proceed with the repair.
WARRANTY FOR WORK
Our repairs carry a warranty. We explain the terms that apply to your job.