- Address:
26 Elizabeth St, South River, NJ 08882
- Email:
mail@truck-repair-nj.com
- Phone line:
+1 (347) 656-62-73
A service record marked “steering greased” leaves an important question unanswered: what condition were the joints in? On a working 122SD, lubrication and a wear assessment are separate jobs. Three shortcuts can turn a reasonable maintenance request into an incomplete repair.
Truck Repair Shop investigates Freightliner chassis and ride concerns in South River, NJ. The distinctions below help you discuss an inspection finding before choosing parts or approving further work.
122SD steering checks need more than fresh grease

Freightliner lists tie-rod inspection and lubrication as separate maintenance operations for the 122SD. Its inspection considers a loose end, missing retention hardware and adequate engagement in the cross tube. A lubricated appearance cannot replace those findings.
For ends covered by Meritor’s MM2 instructions, a torn or missing boot requires complete end replacement. Grease does not change that criterion. Ask whether the earlier visit assessed joint condition as well as recording lubrication.
Putting a bent tube back into service
The cross tube connects the tie-rod ends across the axle. Meritor specifies replacement for a bent or cracked tube and rejects straightening it. Its replacement requirements include the original length, diameter and threads. Making the old tube look straight is not the prescribed correction.
The repair description should identify a damaged tube separately from a worn end or clamp. A general “front-end repair” line obscures that distinction. For related spring, bushing or mounting findings, our truck suspension service explains the surrounding work; it does not make every handling complaint a spring fault.
Treating every fitting as a power-tool job

TRW’s TAS service instructions describe a grease pack behind the output-shaft dirt-and-water seal and specify a hand-operated grease gun. That location is part of the steering gear, rather than a tie-rod socket. Similar fittings do not establish identical servicing methods.
Freightliner’s 122SD maintenance guidance warns that a powered grease gun can deliver lubricant too quickly at the sector shaft, affect the high-pressure seal and contaminate hydraulic fluid. The tool restriction has a mechanical purpose. It should not be dismissed because powered equipment was suitable elsewhere on the chassis.
If steering leakage or an effort change followed lubrication work, include that sequence in the request. It is a reason to examine the serviced area, not proof that the seal was damaged. The identified gear and applicable service instructions govern the assessment.
Coronado SD and 122SD records need the fitted hardware
Use the complete model designation in the truck’s records, including Coronado SD or 122SD. Freightliner’s 2013 122SD tractor brochure lists a range of steer-axle capacities. The model name therefore does not identify a single front-end arrangement or every steering component.
Keep engine details on their own line: Detroit DD13, DD15 or DD16, or the full Cummins ISX, ISX15 or X15 designation shown in the records. Retain the generation and any replacement history. Those powertrain names do not identify the steering gear or select its lubrication procedure. For an engine or transmission concern accompanying the chassis complaint, use our Freightliner repair service information when arranging the visit.
Keep the record useful
A useful handover says which connection was inspected, what required replacement and which servicing operation was completed. Ask for that distinction if the earlier invoice only says “greased” or “adjusted.”
Call (347) 656-6273 about a 122SD assessment; mention any impact, recent lubrication or earlier steering work. Find Truck Repair Shop in South River at 26 Elizabeth Street, NJ 08882. Stop safely if steering is unstable or a linkage is visibly damaged, and arrange recovery instead of driving to the workshop.
Service terms
CLEAR ESTIMATES
Inspection findings, the proposed work and the estimate are discussed before repairs begin.
PARTS OPTIONS
We agree on suitable parts for the engine, the work and your budget.
FREE DIAGNOSTICS WITH REPAIR
Diagnostic work is free when you proceed with the repair.
WARRANTY FOR WORK
Our repairs carry a warranty. We explain the terms that apply to your job.